Filter
Top Products
ENGLISH
Baby Bath Thermometer 100
3
Congratulations on the purchase of the Baby Bath Thermomoter 100. We hope you will
enjoy using the thermometer and the benefits it offers.
1 SAFETY NOTES
• Please read carefully through the following information concerning safety and
proper use. Make yourself familiar with all the functions of the equipment. Be
careful to keep these advice notes and if necessary pass them on to a third party.
• Do not allow children to take the bath temperature unattended.
• Never leave children alone and unsupervised in the bath.
• The bath thermometer is only a simple water temperature indicator. Always
check the temperature of the bath water with the back of your hand before
putting a child into a bath.
• Do not use the thermometer if it is broken or damaged.
• Do not place it into water when the temperature is higher than 70º C.
2HOW TO USE
Make sure that new batteries are installed and the battery compartment (2) is
closed correctly to avoid water insertion.
• Press the On/Off button (3) on the bottom of the unit.
The sensor (1) detects the room temperature and this
is displayed.
• Put the Bath Thermometer on the water. The LCD
displays the accurate water temperature within 90
seconds.
• When the water temperature ranges from 38º C to
42º C, the LED, under the display, lights persistently,
which means the temperature is suitable for bath.
The ideal water temperature for a baby bath is 38°C.
When the water temperature is higher than 70º C, the
LCD displays “Hi” and it displays “Lo” when the water temperature is lower
than 0º C.
• Press and hold the On/Off button (3) for two seconds to turn off the unit.
o
p
e
n
c
l
o
s
e
O
n
/
o
f
f
1
2
3