Filter
Top Products
15
b) To see Calorie Value Save in Memory
1. Press the MR key while the scale is in weighing mode to show
the total calories in memory.
2. Press the MR key again to show total calories of the meal.
Press (▲) or (▼) to select the meal number and see the values.
3. Press the MR key again to show total calories of the food.
Press (▲) or (▼) to select the food number and see the values.
4. Press “CANCEL” to return to the weighing screen.
c) Adding Foods to Memory at a Later Time
If you are unable to use your Taylor Cal-Max scale just before you eat certain
foods, such as while eating at a restaurant, do not worry; this scale has a
feature that allows you to add your foods in your own time without actually
weighing the food. You can do this by following the instructions below:
1. As described in the “ANALYZING YOUR FOODS” section (page 7), use
the key pad to display a food and press “ENTER” to select.
2. DO NOT put anything on the scale. Wait for the weighing screen
to appear. Estimate the weight of the food you wish to record
in grams.
TIP: 1oz = approximately 28g
3. Manually enter the estimated weight by pressing the appropriate
numbers on the key pad; Press “ENTER”.
4. Press “M+” to add this food to memory.
Press MR
Press
MR Press MR
Press “▲” or “▼” to
select “01-30” meals
Select “M01-M99” Food