Filter
Top Products
AOC-R1UG-IBQ Add-on Card User’s Manual
3-2
7. Plug the power cord into the wall socket and power up the system.
3-2 Installing Drivers and Firmware
Use the procedures below to install both drivers and firmware for the AOC-R1UG-IBQ
add-on card for both Linux and Windows.
Linux Drivers
Use the following procedures for installing AOC-R1UG-IBQ add-on card drivers for the
Linux operating system.
Installing InfiniBand Drivers for the Linux Operating System
1. From the CDR-NIC LAN driver CD or FTP site, go to the following directory:
M
ELLANOX Æ INFINIBAND Æ LINUX.
2. Choose the InfiniBand Linux driver package file.
3. Install the driver by the following commands:
tar xzvf OFED-<ver>.tgz
cd OFED-<ver>
./install.pl
This installs the Linux drivers to your system.
Installing 10G Drivers for the Linux Operating System
1. From the CDR-NIC LAN driver CD or FTP site, go to the following directory:
M
ELLANOX Æ CONNECTX_EN Æ LINUX.
2. Choose the 10G Linux driver package file.
3. Install the driver by the following commands:
tar xzvf mlnx_en-<ver>.tgz
cd mlnx_en-<ver>
./install.sh
This installs the 10G drivers to your system.
Windows Drivers
Use the following procedures for installing AOC-R1UG-IBQ add-on card drivers for the
Windows operating system.
Installing InfiniBand Drivers for the Windows Operating System
1. From the CDR-NIC LAN driver CD or FTP site, go to the following directory:
M
ELLANOX Æ INFINIBAND Æ WINDOWS.
2. Choose the desired InfiniBand Windows driver package file.