Filter
Top Products
33
930373 Rev. B
32
930373 Rev. B
1. Never use the ON/OFF switch to stop your chair except in an emergency.
This will result in an abrupt stop,and may cause you to fall.
2. To slow or stop your chair,return the joystick to neutral.
F. MOTOR LOCKS
Disconnect the motor locks when you need to manually push the chair.
(For example, in an emergency,or if batteries fail).
1. Do not disengage motor locks unless power to the chair is off.
2. Be aware that the chair will not have brakes in the free-wheel position.
3. Make sure that the person pushing the chair has full control when motor
locks are disengaged.
1. To Disengage Motor Locks:
a. Turn off power to the chair.
b. Facing the rear of the chair,rotate
lever (A - left side) clockwise.
c. Rotate lever (B - right side) counter
clockwise.
2. To Engage Motor Locks:
a. Turn off power to the chair.
b. Face the rear of the chair; rotate lever
(A - left side) counter clockwise.
c. Rotate lever (B - right side) clockwise.
Note: Chair will move freely,power on or
power off,with the motor locks disengaged.
X. OPERATING GUIDE
A
B
E. INTEGRAL CONTROLLER
The controller contains a microprocessor,
which controls the chair’s performance.The
controller consists of the following parts:
1. Speed Control Knob:
Use this knob to adjust the maximum
speed of your chair.Turn it counter-clock-
wise to reduce speed;turn it clockwise to
increase speed.The speed control knob
will also affect maximum acceleration
reverse speed and turning speed.
2. Battery Charge Indicator:
• Green lights indicate that batteries are
fully charged.
• Yellow lights indicate that batteries
need recharging.
• When the lights stay in the red band,
the batteries must be recharged.
3. On/Off Button:
Press the green on/off button to provide
power to your chair.Turn the on/off but-
ton off when chair is not in use.The bat-
tery level indicator will illuminate when
power switch is on.
4. `Joystick:
The joystick controls the direction an speed
of your chair.Turn the chair on and move
the joystick in the direction you want to go.
• Moving the joystick from the neutral
(center) position disengages the motor
locks, allowing the chair to move.
• The chair will move faster the more you
move the joystick away from neutral.
• Note: If your speed becomes hard to
manage, release the joystick and the
chair will come to a complete stop.
• When you release the joystick it will
return to neutral;the chair will slow to a
stop and the motor locks will re engage.
• We recommend that you switch the
chair off if you stop for any length of
time.This will conserve battery power.
Note: Once the chair stops, switching the
chair off will not affect the motor locks.
5. Joystick Boot:
Make sure the boot is not torn or cracked
(this could allow water or moisture to enter).
If the boot is torn or cracked, replace it
as soon as you can.
X. OPERATING GUIDE
1
5
4
2
3