Filter
Top Products
930490 Rev. A
20
E
nglish
IX. Set-Up, Adjustment & Use
3
4
A. BATTERY CASE REMOVAL (Figure 1)
To remove the batteries for transporting or servicing:
Pull up on battery pack handle (A), disengaging Velcro®.
NOTE– Removing the scooter seat may provide better access to the battery case.
Batteries may weigh up to 55 lbs. Care must be taken to avoid injury when lifting
up on battery case.
B. ARMREST INSTALLATION AND WIDTH ADJUSTMENT (Figure 2)
a. Insert armrest support inside of 1" square tube (B) located on the
underside of the seat.
b. Repeat for other side of seat.
c. Position armrest at appropriate width.
d. Tighten knob screws (C) on square tube.
Avoid pinching fingers in the flip-back armrest.
C. TILLER
1. Tiller Adjustment (Figure 3)
The scooter features an adjustable tiller which allows you to lock the tiller in the most
comfortable driving position. This feature also lets you fold the tiller down fully, for trans-
portation and stowage.
1. Support the tiller with one hand.
2. Loosen soft-sided tiller knob (D) to release teeth integration.
3. Move the tiller to the desired angle.
4. Tighten tiller knob until teeth are fully engaged.
2. Tiller Lock Mechanism (Figures 3 & 4)
The tiller lock mechanim locks the tiller and front wheels in a fixed position. Locking the
tiller will ease assembly/disassembly and transportation of the scooter.
a.
Locate th
e r
ed tiller lock (E) on the front of the tiller.
b. Push the lock up and over to lock the tiller. (Fig. 4)
c
. Reverse to unlock.
1
2
A
D
E
B
C