Filter
Top Products
Please note that this process is not reversible.
To help protect our environment, we encourage you to recycle at
approved recycling locations. Do not dispose of the batteries in normal
household waste.
Removing the batteries
To remove the batteries yourself, you will need a flat-head (standard)
screwdriver and a small towel. Basic safety precautions should be
observed when following the procedure outlined below. Be sure to
protect your eyes, hands, fingers and the surface on which you are
working.
1 With the brush head still attached to the power handle,
completely deplete the batteries of electrical charge by
pressing the power button and running a brushing cycle until it
stops.
Repeatedly run brushing cycles until the handle will no longer activate
the brush head.
2 Remove the brush head from the handle.
C
3 Split the handle open by inserting the screwdriver head all the
way through both slots on the top part of the handle throat,
where the brush head was previously attached.
C
4 Turn the screwdriver handle sideways, using twisting and prying
motions, to crack open the handle along its side seams.
C
5 Pull the 2 handle sections completely apart.
ENGLISH 11