Filter
Top Products
Features
Easy-start\ brushing power ramp-up
◗ All Sonicare models come with the Easy-start feature activated,
which helps you get used to brushing with Sonicare.
◗ Brushing power will gently increase to full power over the first
14 brushings.
◗ The Easy-start feature is active if you hear 2 beeps immediately
after turning on your Sonicare. Once the appliance has reached
optimal brushing power (after the 14th brushing), you will no
longer hear the double beep at the beginning of your brushing
routine.
B
Note: Each of the first 14 brushings must be at least 1 minute in length
to properly advance through the Easy-start ramp-up cycle.
To deactivate or activate the Easy-start feature:
1 Attach your brush head to the handle.
2 Place the handle in the plugged-in charger.
3 To deactivate Easy-start feature:while handle is still in the
charger, press and hold the power button for 5 seconds.You
will hear 1 beep to indicate that the Easy-start feature has
been deactivated.
4 To reactivate Easy-start: while handle is still in the charger,
press and hold the power button for 5 seconds.You will hear 2
beeps to indicate that the Easy-start feature has been activated.
Using the Easy-start feature beyond the initial ramp-up period is not
recommended and reduces Sonicare's effectiveness in removing
plaque.
The Easy-start feature should be deactivated when Sonicare is used in
clinical trials.
Smartimer\ 2-minute timer
◗ All Sonicare models come with the Smartimer feature, which
automatically sets the brushing time to the 2 minutes
recommended by dental professionals.
◗ After 2 minutes, your Sonicare will automatically turn off the
toothbrush.
◗ If you wish to pause or stop brushing during your 2-minute cycle,
press the power button. Press the power button again and the
Smartimer will pick up where you left off.
ENGLISH 9
4235 020 01173 13-01-2006 07:31 Pagina 9