B
The Smartimer will automatically reset to the beginning of a 2-minute
cycle if:
- brushing is paused for 30 seconds or longer;
- the handle is returned to the charger.
Quadpacer\ 30-second interval timer
C
◗ Quadpacer makes sure that you brush all sections of your mouth
evenly and thoroughly.When using a two-minute brushing cycle,
you will hear a short beep and a pause in brushing action at 30, 60
and 90 second intervals.
Programmable Quadpacer timer (select models only)
The Programmable Quadpacer timer offers you the option of
customizing the Quadpacer performance in 1 of 3 ways:
◗ You may opt to keep the factory default setting of a 2-minute
brushing time with Quadpacer feature activated.
◗ You may choose to extend your brushing time to 2 1/2 minutes
by adding an additional timing interval of 30 seconds with
Quadpacer feature active.
◗ You may choose a 2-minute brushing time, but with the
Quadpacer feature turned off.
To change the Quadpacer settings:
1 Place the handle in the charger that is plugged into a live
electrical outlet.
C
2 Press the Dual Speed Control button briefly and note which
LED lights up.
3 Press and hold the Dual Speed Control button. Continue to
hold the button while the LEDs slowly cycle through the timing
interval setting options:
C
◗ Green LED in position 4:Quadpacer active (factory default
setting).
ENGLISH10
1
2
4
3
4235 020 01173 13-01-2006 07:31 Pagina 10