Filter
Top Products
16
Food code: The nutritional value, energy value and density of 425 foods
are set in your diet computer. The chosen food, which has a three-digit
number, is entered on the numerical keypad. The respective codes are
listed on the enclosed list of foods.
Example: For food no. 4 (bread rolls), the figure 004 must be typed in.
The figures 000, as well as 426 to 999, are not valid. If one of these
figures is entered by mistake, the figure flashes in the display. It is not
possible to recall and display the nutritional values or to transfer data
from the scales to a PC.
Individual nutritional values of the food entered can be recalled via the
corresponding keys in the function field.
In order to weigh liquids, you first have to switch over to the volume
mode via the "Vol" key.
If neither liquid nor bulk goods are to be weighed, 5 dashes will appear
in the volume mode. By repeatedly pressing the Vol. key, "ml" can be
changed to "floz" or "flozUS".
Weighing, saving and recalling values:
Tare container or base once more. Place or pour in the first food and
enter the 3-digit food code.
By pressing the "M+" key, all of the food values will be stored and added
up when more food is added.
In order to zero the value of the previously weighed food and weigh
other food, the "TARA" key must be pressed for each individual food
added.
The corresponding code number of each food should be entered and
added to the accumulator by pressing the "M+" key. The "M+" key
should be pressed only once with each addition, otherwise the current
values are added on again to the accumulator! An "M" in the display
indicates that the values are to be found in the accumulator.
If at the end of a chosen period of time you want to know how much
and what you have eaten, you can recall the values of the foods weighed
and accumulated in each nutritional value mode.