Filter
Top Products
12/2/2004 - 7 -
ADJUSTMENTS
Tiller Angle Adjustment (Fig 2)
On the left hand side at the base of the
tiller is a red lever. Push the lever to
release the pin and select the desired
tiller angle. Refit the pin into one of
the three location holes to lock tiller in
place.
Folding the Tiller
Fold down the tiller by pushing the lever to release the pin (fig 2).
Seat Removal
Turn the seat hand knob under the base of the seat counterclockwise to loosen. Lift the
seat off the seat post.
Seat Height Adjustment
Remove seat as described. Remove rear
chassis cover. The seat height can be
adjusted to three different settings by
inserting the adjustment bolt in the desired
hole. Replace the seat post, tighten the seat
hand knob and replace the seat. Tighten the
seat knob.
Figure 2
Tiller Angle
Adjustment
Knob
Seat
Adjustmen
t Holes
Figure 3