Filter
Top Products
SK 3063-U
BATTERY CONTROL DISPLAY
100 %
50 %
10 %
STARTS BLINKING IF THE REMAINING
OPERATING TIME FALLS BELOW 30 MIN.
Microphone selection
The MKE 2-4, MKE 102-4 (omnidirectional pick-up pattern) and
MKE 40-4, MKE 104-4 (cardioid pick-up pattern) clip-on microphones
are available. They are equipped with a special Lemo plug. The plug is
disconnected by unscrewing the threaded collar.
The voltage necessary to operate these microphones is available at the
microphone input of the transmitter. Dynamic microphones and other
low-impedance sources can be connected through an external coupling
condenser of approx. 10 µF (+pole on contact 2).
Using for the first time
B 50 / B 250 quick-change energy pack
Insert the batteries as described on page 15, Fig. 2 and Fig. 3 (delivery
includes power pack B 50).
After inserting the batteries, the cover of the quick-change energy pack is
to be snapped into place. The LED display on the front side of the energy
pack (fig. 1) serves as a battery control display.
FIG. 1