Samsung BF-180M Blood Pressure Monitor User Manual


 
23
Troubleshooting
Troubleshooting
Error/Symbol What Does It Mean? How to Fix It
You have been ignoring
the flashing replace
battery symbol ( ).
Unable to take a
measurement after
receiving an error
symbol.
Blood pressure
value seems too
high or too low
Read page 17
(Applying the Cuff).
Read page 17
(Applying the Cuff).
The monitor keeps
reinflating.
Remove then reinsert
the batteries and then
proceed to take measure-
ment again.
22
Troubleshooting
Error/Symbol What Does It Mean? How to Fix It
Troubleshooting
Monitor may have been
inflated without the cuff
around the arm OR Cuff
may not be postioned
correctly on the arm.
The cuff tube may be fold-
ed
OR
You may have
moved while the cuff was
inflating.
You may have moved
or spoken during the
measurement process.
You may have been
startled by a noise or
vibration while measur-
ing.
Read page 17 (Applying
the Cuff).
Read pages 15 & 16
(Important Reminders).
Remember that it is
important not to move
and speak as it may
elevate measurements.
Make sure you are in a
quiet and comfortable
place when taking a
measurement.
Circuitry locked.
Replace with four new
"AA" batteries. Make
sure the polarities are
positioned correctly in
the battery compart-
ment before continuing
to measure your blood
pressure.
Replace with 4 AA bat-
teries quickly so you
may continue to mea-
sure your blood pres-
sure without any inter-
ruptions.
Cuff may not be
aligned correctly.
The cuff may not be
positioned correctly.
The batteries have run
down.