17
Applying the Cuff
Applying the Cuff
•
Before you put the cuff on your arm make
certain that you are not wearing a thick
coat or sweater.
•
If you are wearing a long sleeved shirt, roll
up the sleeve, but make sure that it is not
constricting circulation to your arm.
•
The cuff should be positioned on your
bicep and the red arterial marker should
be in the center just above your elbow.
Instructions are also printed directly on the
cuff for reference.
•
Wrap the cuff around your upper arm
(usually the left) so it fits securely but is
not too tight. You should be able to place
2 fingers in between the cuff and your
arm. The velcro tab should fall within the
"OK" range printed on the cuff for proper
use. If your arm is larger than 13" around
and the cuff does not fall within the "OK"
range, please use the enclosed large cuff.
•
Place your arm on a table with your palm
facing upwards. The inflation tube should
line up with your arm. Do not allow the
tube to kink or wrap around anything; it
should fall down the center of your arm.
16
Important Reminders
✓
Sit still and quietly while measuring. Talking or moving may
elevate measurements.
For consistency, it’s a good idea to measure your blood pres-
sure using the same arm and at about the same time each
day. If possible, we suggest using your left arm.
When taking multiple measurements right after each other,
make sure you wait at least 10 minutes in between. Waiting
allows your blood vessels to return to their normal state.
Sit with your legs uncrossed and your feet flat on the floor.
Do not touch the cuff or monitor at any time during the mea-
surement. Relax.
Important Reminders
✓
✓
✓
While Taking a Measurement