Filter
Top Products
23
Troubleshooting
Troubleshooting
Error/Symbol What Does It Mean? How To Fix It
You have been ignoring
the flashing replace
battery symbol ( ).
Replace with four new
"AA" batteries. Make
sure the polarities are
positioned correctly in
the battery compart-
ment before continuing
to measure your blood
pressure.
Replace with 4 AA bat-
teries quickly so you
may continue to mea-
sure your blood pres-
sure without any inter-
ruptions.
Unable to take a
measurement after
receiving an error
symbol.
Blood pressure
value seems too
high or too low
Cuff may not be
aligned correctly
Read page 17
(Applying the Cuff).
Read page 17
(Applying the Cuff).
Blood pressure
value seems too
high or too low
Remove then reinsert
the batteries and then
proceed to take mea-
surement again.
22
Troubleshooting
Error/Symbol What Does It Mean? How To Fix It
Troubleshooting
Monitor may have been
inflated without the cuff
around the arm OR Cuff
may not be positioned
correctly on the arm.
Read page 17 (Applying
the Cuff).
Read pages 15 & 16
(Important Reminders).
Remember that it is
important not to move
and speak as it may
elevate measurements.
Make sure you are in a
quiet and comfortable
place when taking a
measurement.
The cuff tube may be folded
OR
You may have moved
while the cuff was inflating.
You may have moved or
spoken during the mea-
surement process.
You may have been
startled by a noise or
vibration while measuring.
Circuitry locked.
The batteries have
run down.
The cuff may not be
positioned correctly.