Filter
Top Products
21
Taking Care of Your Blood Pressure Monitor
It’s important to treat your monitor with care. Here are some basic
tips:
Keep the monitor out of direct sunlight, high humidity, and
extreme temperature changes.
Try not to drop it on the floor.
Do not take the monitor or the cuff apart. None of the moni-
tor’s parts are fixable at home. If your monitor needs repairs
see details in warranty section.
Keep the monitor free of dust and other materials. Avoid
getting any part of the monitor or cuff extremely wet. If
the monitor needs cleaning it’s best to wipe it with a cloth
slightly dampened with water. Healthy Living recommends
cleaning your monitor about once a month.
Do not harshly fold or bend the cuff as
this may damage it on the inside.
Do not inflate the monitor’s cuff if it is not wrapped around
your arm.
Always remove the cuff tube from the monitor with care.
For your safety, do not wrap the cuff around any other
body part other than your arm.
Taking Care of Your
Blood Pressure Monitor
✓
✓
✓
✓
✓
✓
✓
✓
3 Zones of 30 Memory
20
3 Zones of 30 Memory
When you take a measurement, the monitor automatically
stores it in memory space number one. As you continue to take
measurements, the monitor will push the previous measurement
back one space. In other words, the value in space one will
always be the most recent blood pressure measurement taken.
Your monitor features a 3 party memory capability or 3 "zones" -
each zone stores 30 measurements each for a total capacity of
90 measurements. This unique feature allows 3 users to use and
store their blood pressure measurements separately all on one
monitor. This feature is also useful for one user to track their
blood pressure throughout the various periods of the day: morn-
ing, afternoon, and night.
Press the "SET" button to toggle between memory zone No.1, 2,
and 3. Once you select a zone that you want to view the mea-
surements in, press the "MEMORY" button once to view the
most recent measurement along with the time and date that it
was taken. Press the "MEMORY" button again in succession and
you will see all of the measurements registered to that zone. You
can then press the "SET" button to switch to the next zone to
view measurements. The monitor will automatically power off
after about one minute of inactivity.
*When taking measurements, be sure and select the correct
zone number using the SET button so that the measurement is
registered to the appropriate zone.