Filter
Top Products
7.3 Inspection
Check armpad for excess wear or damage.
Check armpad is secured to frame.
Check side panel is not damaged.
Ensure armrest locates in rear bracket on push handle when fitted to wheelchair.
7.4 Armrest Pad
The armrest pad is secured to the armrest frame with three screws whilst the domestic armrest pad
is secured to the armrest frame with two screws. Removal of the screws releases the pad. Secure
the pad with the attachment screws to refit.
7.5 Armrest Panel
The plastic panel is removed by carefully drilling off the heads of the two pop rivets using a 1/4" (or
equivalent) drill bit. Slide the panel forwards on the armrest frame until the moulded hooks release
from the tube.
The plastic panel is fitted by placing the moulded hooks against the armrest frame tubes and pushing
the panel backwards on the frame. Fit 2 new pop rivets using the correct tool.
Section 7 Page 3 of 3