Filter
Top Products
6.3 Inspection
Fabric:
Check for staining, wear, tear and stitching.
Check nut inserts in frame for security and stripped threads.
Check securing screws for bending and stripped threads and burrs.
Cushions (if fitted):
Check cushions for staining, wear, tear and stitching.
Check Velcro attachment tabs are present and secure.
Check Velcro on frame is present and secure.
6.4 Fabric Removal
If the Nutserts need replacement, use Avdel recommended tooling.
6.5 Fabric Fitting
Slide reinforcing bar into stitched section on each side of the fabric.
Fit countersunk screws through flanged cups and fit through holes in fabric and reinforcing bars.
Place fabric on seat and backrest tubes and tighten screws taking care not to exert excessive force to
flatten the flange cup or cut into the fabric.
M5 X 20 INCH
COUNTERSUNK SCREW
REINFORCING BAR
FLANGED SCREW CUP
M5 UNF AVDEL NUTSERT
Section 6 Page 2 of 2