Filter
Top Products
1. Overall length
2. Overall width
3. Folded length
4. Folded width
5. Folded height
6. Maximum weight
7. Weight less armrest
and footrests
8. Seat plane angle
9. Seat widths available
10. Seat depths available
11. Seat height at front
12. Backrest angle
13. Backrest height
14. Footrest to seat
15. Leg to seat angle
16. Armrest to seat
17. Front armrest to backrest
18. Rear wheel diameter
19. Tyre pressures
(Barrett 7H only)
20. Maximum user weight
21. Minimum turning radius
Model 7H
109cm (43")
64cm (25")
84.5cm (33")
28.5cm (11
1
/2")
50cm (19
1
/2")
18kg (40 lb)
14.5kg (32 lb)
10 degrees
38cm (15")
43cm (17”)
43cm (17")
46cm (18")
20 degrees from vertical
46cm (18")
30-40cm (12"-16")
100 degrees
23cm (9")
45cm (17
1
/2")
46cm (18")
40psi/280 kilopascals (KPA)
114kg (18 stone/252 lbs)
80cm (31
1
/2")
Model 10H
109cm (43")
57cm (23")
75cm (29
1
/2")
28.5cm (11
1
/2")
50cm (19
1
/2")
17kg (37 lb)
13.5kg (30 lb)
10 degrees
38cm (15")
43cm (17”)
43cm (17")
46cm (18")
20 degrees from vertical
46cm (18")
30-40cm (12"-16")
100 degrees
23cm (9")
42cm (16
1
/2")
31.5cm (12
1
/2")
-
114kg (18 stone/252 lbs)
75.5cm (30")
SECTION 2: SPECIFICATIONS
For 43cm (17") models. 38cm (15") models are proportionally narrower.
The Barrett 7H and 10H models are designed for a maximum user weight of 114 kilos (18 stone). The
frame has been reinforced and components such as push handles, crossbraces and locking link
assemblies, along with their associated fixtures, have been upgraded to suit. It is therefore essential
that the correct replacement parts are used. Components from previous specification Model 7 and 10
are not compatible and if used would compromise the safety of the wheelchair.