Filter
Top Products
English
5
Cleaning your mask at home
Your mask and headgear should only be gently handwashed. The
mask vent may discolour over time due to dust. Follow the cleaning
instructions in this guide to maintain performance and safety of the
mask.
WARNING
Always follow cleaning instructions and use mild soap. Some
cleaning products may damage the mask, its parts and their
function, or leave harmful residual vapours that could be inhaled
if not rinsed thoroughly.
CAUTION
If any visible deterioration of a system component is
apparent (cracking, crazing, tears etc), the component should
be discarded and replaced.
Avoid connecting flexible PVC products (eg, PVC tubing)
directly to any part of the mask. Flexible PVC contains
elements that can be detrimental to the materials of the
mask, and may cause the components to crack or break.
Daily/After each use:
Disassemble the pillows from the frame according to the
disassembly instructions.
Thoroughly clean the separated mask components (excluding
headgear), by gently rubbing in warm (approximately 30°C) water
using mild soap.
To optimise the mask seal, facial oils should be removed from
the pillows after use.
Use a soft bristle brush to clean the vent.
Inspect each component and, if required, repeat washing until
visually clean.
Rinse all components well with drinking quality water and allow
to air dry out of direct sunlight. Dry the vent by gently wiping
with a cloth.