ResMed P10 Oxygen Equipment User Manual


 
English
1
English
AirFit
P10
NASAL PILLOWS SYSTEM
Thank you for choosing the AirFit P10. This document provides the
user instructions for the AirFit P10 and AirFit P10 for Her masks
referred to collectively as AirFit P10 throughout this manual. AirFit
P10 has blue headgear while AirFit P10 for Her has pink headgear.
Using this guide
Please read the entire guide before use. When following instructions,
refer to the images at the front and back of the guide.
Intended Use
The AirFit P10 channels airflow noninvasively to a patient from a
positive airway pressure (PAP) device such as a continuous positive
airway pressure (CPAP) or bilevel device.
The AirFit P10 is:
to be used by patients (> 30 kg) for whom positive airway
pressure has been prescribed
intended for single-patient re-use in the home environment and
multipatient re-use in the hospital/institutional environment.
GENERAL WARNINGS
The mask must be used under qualified supervision for users
who are unable to remove the mask by themselves. The
mask may not be suitable for those predisposed to
aspiration.
The vent must be kept clear.
The mask should only be used with CPAP or bilevel devices
recommended by a physician or respiratory therapist.
The mask should not be used unless the device is turned on.
Once the mask is fitted, ensure the device is blowing air.
Explanation: CPAP and bilevel devices are intended to be
used with special masks (or connectors) which have vent
holes to allow continuous flow of air out of the mask. When