Filter
Top Products
5
TO REPLACE THE CUTTERS
Grasp cutter between thumb and forefi nger
Note: Do not press on the cutter ends as this may cause damage.
ENGLISH
080621_REME_IFU_FF500_FF600_inneGB_5 GB_5080621_REME_IFU_FF500_FF600_inneGB_5 GB_5 08.28.2008 7:25:42 Uhr08.28.2008 7:25:42 Uhr
Spare Parts F3790
Replacement model :
SP-62
TO REPLACE THE FOIL
Pull the foil assembly to remove from the hair pocket.
Insert new foil assembly in hair pocket until it snaps in place.
IMPORTANT SAFETY INSTRUCTIONS
WARNING – TO REDUCE THE RISK OF BURNS, ELECTROCUTION, FIRE,
OR INJURY TO PERSONS:
An appliance should never be left unattended when plugged in to a power outlet, except
when charging.
Keep the power plug and cord away from heated surfaces.
Make sure the power plug and cord do not get wet.
Do not plug or unplug the shaver with wet hands.
Do not use the product with a damaged cord. A replacement can be obtained via the
Remington
®
Service Center.
tore the product at a temperature between 0°C and 32°C.
Only use the parts supplied with this appliance. Use of non Remington
®
parts with this
product may give rise to a hazardous condition.
Do not submerge or place under running water.
Keep this product out of reach of children. The use of this appliance by persons with
reduced physical, sensory or mental capabilities or lack of experience and knowledge can
give cause to hazards. Persons responsible for their safety should give explicit instructions
or supervise the use of the appliance.
down
and turn the assembly 90 degrees.
Place the new cutters on the pin at 90 degrees and rotate 90 degrees to lock in place.
S
Keep the appliance dry.