Filter
Top Products
4
CLEANING
Press the head release button to remove the head assembly.
(Fig. )
Thoroughly blow out the stubble from the foils and cutters.
Use the cleaning brush to sweep out the cutters. Do not use the cleaning brush on the
foils. Damage may occur to the holes of the foils.
Replace head assembly
CAUTION:
Do not clean the shaving foil with the brush.
REPLACING THE FOILS & CUTTERS
To ensure the continued highest quality performance from your shaver, we recommend that foils
and cutters are replaced regularly.
Signs that your foils and cutters need replacing:
Irritation: As foils get worn, you may experience skin irritation.
Pulling: As the cutters wear, your shave may not feel as close and you may feel your cutter
pulling your hair.
Wear through: You may notice that the cutters have worn through the foils.
ENGLISH
080621_REME_IFU_FF500_FF600_inneGB_4 GB_4080621_REME_IFU_FF500_FF600_inneGB_4 GB_4 08.28.2008 7:25:42 Uhr08.28.2008 7:25:42 Uhr
CARE FOR YOUR SHAVER
Do not remove or replace head assembly while shaver is running as it may cause damage
to the unit’s foils and cutters.
To clean the external surfaces of the shaver, use a damp cloth.
Do not use strong detergents or other chemicals.
To dry, wipe the surface of the shaver with a dry towel.
Care for your product to ensure a long lasting performance. We recommend you
clean your shaver after each use. Using the brush supplied clean the internal parts of
the head assembly and shaver body. Always keep the protective cap on the shaving
head and keep the trimmer in the “off” position when the shaver is not in use.
Never submerge your shaver in water.
.
(Fig. H
)
G
(F
ig.
)
F