Filter
Top Products
3. Press the USER ID Selection Switch ( )
to select your ID (A or B).
A and B are alternately displayed.
You do not need to press this button if no
change is needed.
NOTE: Always use the same User ID
when taking a measurement. The monitor stores the
measurement values in the memory by the User ID selected.
4. Press the START/STOP button again.
The cuff starts to inflate automatically. As the cuff inflates, the monitor
automatically determines your ideal inflation level.
This monitor detects your blood pressure and pulse rate during
inflation. The Heartbeat Symbol ( ) flashes at every heartbeat. Do
not move your arm and remain still until the entire measurement
process is completed.
NOTE: To stop the inflation or measurement, press the START/STOP
button. The monitor will stop inflating, start deflating and will
turn off.
TAKING A MEASUREMENT
31
HEM-7300-WM_A_M_A-E_SP.qxp 8/19/11 5:29 PM Page 31