Filter
Top Products
5
Using a 5 mm Allen wrench, check that the clamp bolts are tightened securely.
Check the pressure of your tires and inspect them for any signs of damage.
Check your front and rear bolts to ensure they are tight.
q Collar Clamp q Tires
q Wheels and Bearings
It is the responsibility of the owner or guardian to periodically inspect the wheels for wear and tear, the axle for
proper tightness, and bearings for side-to-side play and loose parts. When a wheel or wheel bearing develops
play, this is an indication of excess wear and replacement is necessary. Replace immediately with only genuine
Razor replacement wheels. Worn wheels/bearings are considered normal wear and tear and are not covered by the
Warranty. Other manufacturers’ wheels may not be compatible with your RDS scooter, may affect your safety and
will void your warranty.
q Cleaning Your Scooter
Wipe with a damp cloth to remove dirt and dust.
Do not use industrial cleaners or solvents as they may damage the surfaces. Do not use alcohol, alcohol-based or
ammonia-based cleaners as they may damage or dissolve the plastic components or soften the decals or decal
adhesive. To clean grip tape, use a wet coarse bristle brush to scrub any dirt stuck to the surface and let dry.
q How to Ride
Place one foot on the baseboard, push forward with the other foot. Steer. For enhanced cornering, lean slightly
into the direction of the turn. For controlled stops, apply the brake by stepping on the rear fender/brake. Practice
applying the brake at various speeds and in an open area free from obstructions before riding around others.
WARNING: Wheelies
and other stunt-type riding
reduces your ability to maneuver
and control your scooter. Take
the necessary precautions,
such as wearing appropriate
protective gear and practice in
an area safe for stunt riding and
free from obstructions.
CHECK BEFORE RIDING