Filter
Top Products
4
2 Securely tighten the bolt
as shown.
4 Securely tighten the bolt
as shown.
1 Completely deflate the tire. Use
a 5 mm Allen wrench to remove the
four bolts on the hub. Remove the
worn/damaged tire or inner tube
and replace it with a new one.
Note: Be careful not to lose the
four nuts on the opposite side of
the hub.
2 Assemble the hub using the
diagram at right. Tighten bolts
using 5 mm Allen wrench.
Re-inflate. (Do not exceed 60 PSI.)
1 Front wheel sequence. 3 Rear wheel sequence.
q Replacing the Tires/Tubes
Tools Required: 5 mm Allen Wrench
q Replacing the Wheels
Tools Required: 5 mm Allen Wrench
REPAIR AND MAINTENANCE
Bearings
Wheel Hub
Inner Tube
Tire
Fastener Bolts
Bearings
Nuts