Filter
Top Products
4
REPAIR AND MAINTENANCE
Check the Razor web site for any updates on the latest repair and maintenance procedures.
Turn power switch off before conducting any maintenance procedures.
❑
Adjusting the Brakes
1
To adjust the play, thread the
brake lever adjuster in or out 1/4
to 1/2 turn until the desired brake
adjustment is attained. Most
adjustments are complete at this
step. If brake still needs further
adjustment, proceed to step 2.
2
If the brake lever adjuster is
threaded outward and the brake
still has too much slack, use the
rear brake adjuster for additional
adjustment.
❑
Infl ating the Tires
Tires are infl ated when shipped, but they invariably lose some pressure between the point of manufacturing and
your purchase.
1
Using a bicycle style tire pump
equipped for a Schrader-type valve,
infl ate the front tire to the PSI
indicated on the sidewall of the
tire.
Note:
The pressurized air supplies
found at gasoline stations are
designed to infl ate high-volume
automobile tires. If you decide to
use such an air supply to infl ate
your Pocket Mod tires, fi rst make
sure the pressure gauge is working,
then use very short bursts to
infl ate to the correct PSI. If you
inadvertently over-infl ate the
tire, release the excess pressure
immediately.