Remove contents from box. Remove the foam separators that protect the components from damage during shipping.
Inspect the contents of the box for scratches in the paint, dents or kinked cables that may have occurred during
shipping. Because the EcoSmart Metro electric scooter was 95 percent assembled and packed at the factory, there
should not be any problems, even if the box has a few scars or dents.
Estimated Assembly and Set-Up Time
Razor recommends assembly by an adult with experience in bicycle mechanics.
Allow up to 30 minutes for assembly, not including initial charge time.
Allow up to 12 hours for initial charge (see page 5 for charging information).
BEFORE YOU BEGIN
2
WARNING:
DO NOT USE NON-RAZOR
PRODUCTS WITH YOUR
ECOSMART METRO
ELECTRIC SCOOTER. The
scooter has been built to certain
Razor design specifications. The
original equipment supplied at the
time of sale was selected on the
basis of its compatibility with the
frame, fork and all other parts.
Certain aftermarket products may
or may not be compatible.
Required Tools
Need Help? Visit our website for replacement parts, product support and a list of authorized service centers
at www.razor.com or call toll free 866-467-2967 Monday - Friday 8AM - 5PM Pacific Time. Please have the
product I.D. code located on the white label on your product or back of charger available for better assistance.
5 mm
Allen wrench
(included)
Phillips screwdriver
(included)
13/15mm open wrench and
8/10mm open wrench
(included)
Spoke tightener
(included)
Throttle
Brake Lever
Adjuster
Brake Lever
T-tube
Clamp
Headset
Front Fork
Frame
Seat
Clamp
Deck Plate
Motor
Luggage Rack
Brake
Rear Wheel
Kick Stand
Charging Port
On/Off Switch
Battery Pack
and Motor Controller
Front Wheel
Charger Plug
Charger Port