Pride Mobility Victory 9 Mobility Aid User Manual


 
46 www.pridemobility.com Victory Series
1
Varies with user weight, terrain type, battery amp-hour (Ah), battery charge, battery condition, and tire condi-
tion. This specification can be subject to a variance of (+ or -) 10%.
2
Tested in accordance with ANSI/RESNA, WC Vol 2, Section 4 & ISO 7176-4 standards. Results derived from
theoretical calculation based on battery specifications and drive system performance. Test conducted at maximum
weight capacity.
3
Due to manufacturing tolerances and continual product improvement, this specification can be subject to a
variance of (+ or - ) 3 %.
4
AGM or Gel-Cell type required. See IV. “Batteries and Charging.”
5
Battery weight may vary based on battery manufacturer.
6
Includes standard seat.
NOTE: This product conforms to all applicable ANSI-RESNA testing requirements and ISO 7176
series EN12184 standards. All specifications subject to change without notice.
VICTORY 9 PS SPECIFICATIONS
Model Number SC609PS
Maximum Allowable Incline 8° (14.1%)
Maximum Obstacle Climbing Ability 3 in. (7.62 cm)
Overall Length
3
43.5 in. (110.5 cm)
Overall Width
3
22.125 in. (56.2 cm)
Total Weight Without Batteries
6
131 lbs. (59.42 kg)
Heaviest Piece When Disassembled Front Section 59.5 lbs.(26.99 kg)
Turning Radius
3
40.25 in. (102.24 cm)
Speed (Maximum)
1
5.5 mph (8.85 km/h)
Range Per Charge
1,
2
13 miles (21 km)
Ground Clearance
3
2 in. (5 cm) at mid-frame
Weight Capacity
300 lbs. (136 kg)
Standard Seating Type: Foldable Molded Plastic
Weight: 28 lbs. (12.7 kg)
Material: Black Vinyl
Dimensions:
18 in. (45.72 cm) overall width
17 in. (43.18 cm) effective depth
Drive System Rear-wheel drive, sealed transaxle, 24-volt DC motor
Dual Braking System Regenerative and electromechanical
Tires Front: 8 in. (20.32 cm), solid
Rear: 9 in. (22.86 cm), solid
Battery Requirements
4,5
Two 12-volt, deep-cycle
Size: U1 (31-36 Ah)
U1 Battery Weight: 24.5 lbs. (11 kg) each
Battery Charger 3-amp, off-board with U1 batteries
APPENDIX I - SPECIFICATIONS