Filter
Top Products
Victory Series www.pridemobility.com 35
VII. DISASSEMBLY AND ASSEMBLY
DISASSEMBLY
You can disassemble the scooter into several
pieces: the seat, the front section, the rear section,
the battery shroud (if equipped), the basket, and
the batteries or battery boxes. See figure 19. No
tools are required to disassemble or assemble
your scooter, but keep in mind that the disassem-
bled sections of the scooter take up more floor
space than the assembled unit. Always disassem-
ble or assemble your scooter on a level, dry sur-
face with sufficient room for you to work and
move around your scooter–about 5 feet (1.5
meters) in all directions. Remember that some
scooter components are heavy and you may need
assistance when lifting them.
WARNING! Do not lift beyond
your physical capability. Ask for
assistance when necessary
while disassembling or
assembling your scooter.
1. Remove the seat by lifting it straight up and
off of the scooter. If you encounter resistance
when removing the seat, disengage the seat
rotation lever and swivel the seat back and
forth while lifting up on the seat.
2. Gently pull the battery shroud up and off of
the scooter.
3. Disconnect the battery tie-down strap.
4. Unplug both battery harnesses by pulling
each harness straight up. See figure 20.
5. Remove the batteries from the battery wells.
WARNING! Failure to unplug both
battery harnesses prior to
separating the front and rear
sections could result in
permanent damage to the
scooter.
Figure 19. Scooter Components
Figure 20. Harness Connections
FRONT SECTION
SEAT
REAR SECTION
BATTERY SHROUD
BATTERIES
BASKET
*BATTERY BOX CONFIGURATION NOT SHOWN.
BATTERY HARNESS CONNECTIONS
BATTERY TIE-DOWN STRAP