Pride Mobility v10 Mobility Aid User Manual


 
V10 www.pridemobility.com 43
APPENDIX I - SPECIFICATIONS
1
Varies with user weight, terrain type, battery amp-hour (Ah), battery charge, battery condition, and tire condi-
tion. This specification can be subject to a variance of +10%, -5%.
2
Tested in accordance with ANSI/RESNA, WC Vol 2, Section 4 & ISO 7176-4 standards. Results derived from
theoretical calculation based on battery specifications and drive system performance. Test conducted at maximum
weight capacity.
3
Due to manufacturing tolerances and continual product improvement, this specification can be subject to a
variance of (+ or -) 3 %.
4
AGM or Gel-Cell type required. See IV. “Batteries and Charging.”
5
Battery weight may vary based on battery manufacturer.
6
Includes standard seat.
NOTE: This product conforms to all applicable ANSI-RESNA testing requirements and ISO 7176
series EN12184 standards. All specifications subject to change without notice.
V10 SPECIFICATIONS
Model Number SC610V
Maximum Allowable Incline 6° (10.5%)
Maximum Obstacle Climbing Ability 2 in. (5 cm)
Overall Length
3
46 in. (116.8 cm)
Overall Width
3
22.25 in. (56.5 cm)
Total Weight Without Batteries
6
131 lbs. (59.4 kg)
Heaviest Piece When Disassembled Front Section: 53.5 lbs. (24.27 kg)
Turning Radius
3
42 in. (106.68 cm)
Speed (Maximum)
1
5.5 mph (8.85 km/h)
Range Per Charge
1,
2
15.5 miles (25 km)
Ground Clearance
3
4 in. (10.16 cm) at mid-frame
Weight Capacity
350 lbs. (158.75 kg)
Standard Seating Type: Foldable Molded Plastic with Sliders
Weight: 28 lbs. (12.7 kg)
Material: Black Vinyl
Dimensions:
18 in. (45.72 cm) width
17 in. (43.18 cm) depth
Drive System Rear-wheel drive, sealed transaxle, 24-volt DC motor
Dual Braking System Regenerative and electromechanical
Tires 10 in. (25.4 cm) solid
Battery Requirements
4, 5
Two 12-volt, deep-cycle
Size: U1 (31-36 Ah) or optional 40 Ah
U1 Battery Weight: 24.5 lbs. (11 kg) each
40 Ah Battery Weight: 32.5 lbs. (14.74 kg) each
Battery Charger Off-board