Pride Mobility v10 Mobility Aid User Manual


 
V10 www.pridemobility.com 19
*POWER SEAT SWITCH
*HAZARD LIGHTS SWITCH
HORN BUTTON
III. YOUR SCOOTER
TILLER CONSOLE
The tiller console houses all of the controls needed to drive your scooter, including the speed adjustment
dial, key switch, battery condition meter, status LED, horn buttons, turn signal buttons, accessory
switches, and the throttle control lever. See figure 4. Please note that some of the features listed in this
section are optional items available only on certain models in the Victory product line. Contact your autho-
rized Pride Provider for more information regarding product release and availability.
PROHIBITED! Do not expose the tiller console to moisture. In the event that the tiller
console does become exposed to moisture, do not attempt to operate your scooter until
the tiller console has dried thoroughly.
Figure 4. Tiller Console Components
SPEED ADJUSTMENT DIAL
BATTERY CONDITION METER
THROTTLE
CONTROL
LEVER
STATUS LED
Speed Adjustment Dial
This dial allows you to preselect and limit your scooter’s top speed.
The image of the tortoise represents the slowest speed setting.
The image of the hare represents the fastest speed setting.
Key Switch
Insert the key into the key switch and turn it clockwise to power up (turn on) your scooter.
Turn the key counterclockwise to power down (turn off) your scooter.
WARNING! If the key is turned to the “off” position while your scooter is in motion, the
electronic brakes will engage and your scooter will come to an abrupt stop!
Battery Condition Meter
When the key is fully inserted and turned clockwise to power up your scooter, this meter indicates the
approximate battery voltage strength. For further information on battery charging, see IV. “Batteries and
Charging.”
*RIGHT TURN SIGNAL
BUTTON
LIGHTS SWITCH
KEY SWITCH
*HI-LOW SWITCH
THROTTLE
CONTROL
LEVER
HORN BUTTON
TURN SIGNAL INDICATOR
TURN SIGNAL INDICATOR
*LEFT TURN SIGNAL
BUTTON
*OPTIONAL COMPONENTS - CONTACT YOUR AUTHORIZED PROVIDER FOR AVAILABILITY.