Filter
Top Products
Jazzy Sport 2 www.pridemobility.com 13
Manual Recline Seatback Adjustment
If your power chair is equipped with a manual recline
seatback, you can adjust the seatback angle with the
seatback release lever. The lever is located on the right
side of the seat base. See figure 9.
To adjust the recline angle:
1. Pull up on the seatback release lever.
2. Lean forward or backward to the desired position.
3. Release the lever.
Armrest Width Adjustment
You can change each armrest’s width independently of
the other.
NOTE: Changing the armrest width may increase the
overall width of your power chair.
To change the armrest width:
1.
Locate the armrest width adjustment setscrew on each
side of the armrest receiver bracket.
See figure 9.
2. Loosen the setscrew.
3. Slide the armrests in or out to the desired width.
4. Tighten the setscrew.
Armrest Angle Adjustment
To change the armrest angle:
1. Lift the armrest straight up so that it is perpendicu-
lar to the floor.
2. Loosen the jam nut.
3. Turn the adjustment screw to raise or lower the
front of the armrest.
4. Tighten the jam nut to lock the adjustment screw
into place.
Armrest Height Adjustment
To change the armrest height:
1. Loosen the setscrew on the armrest. See figure 9.
2. Raise or lower the armrest to the desired height.
3. Tighten the setscrew to secure the armrest.
V. COMFORT ADJUSTMENTS
Figure 9. Armrest and Seatback Adjustments
ARMREST WIDTH
ADJUSTMENT
SETSCREW
JAM NUT
ARMREST HEIGHT
ADJUSTMENT
SETSCREW
ARMREST ANGLE
ADJUSTMENT
SCREW
SEATBACK
RELEASE LEVER