Filter
Top Products
30
www.pridemobility.com Go-Go Ultra X
VIII. DISASSEMBLY AND ASSEMBLY
DISASSEMBLY
You can disassemble the Travel Scooter into five pieces:
the seat, the front section, the rear section, the basket,
and the battery pack. See figure 16. No tools are
required to disassemble or assemble your Travel
Scooter. Always disassemble or assemble your Travel
Scooter on a level, dry surface with sufficient room for
you to work and move around—about five feet in all
directions. Remember that some Travel Scooter com-
ponents are heavy and you may need assistance when
lifting them.
WARNING! Lifting weight beyond
your physical capability may result
in personal injury. Ask for
assistance when necessary while
disassembling or assembling your
Travel Scooter.
SEAT
REAR SECTION BATTERY PACK
BASKET
FRONT SECTION
Figure 16. Disassembled Travel Scooter
1. Lock the tiller in the straight ahead position by pushing the tiller lock knob in and turning it clockwise 90°. See
figure 17. The front wheel must face forward in order to lock the tiller.
2. Remove the seat by lifting it straight up and off of the Travel Scooter. If you encounter resistance when
removing the seat, disengage the seat rotation lever and swivel the seat back and forth while lifting up on the
seat.
3. Remove the battery pack from the Travel Scooter.
Figure 17.
Tiller Lock knob (Locked)
LOCKED
POSITION
Figure 18. Tiller Lock Knob (Unlocked)
UNLOCKED
POSITION
Frame Separation
1. Lower the tiller and tighten the tiller adjustment knob.
2. Lift up on the frame release lever until the frame hooks are no longer resting on the lower frame tube. See figure 19.
3. Slowly separate the two sections of the Travel Scooter. See figure 19.