Filter
Top Products
25
Boxter
TILLER ANGLE ADJUSTMENT
WARNING! Remove the key before adjusting the tiller.
You can adjust the tiller to many positions. The tiller adjustment lever locks the tiller in place. It has a
spring-loaded mechanism that enables you to rotate it and change its position.
LOWER SEAT POST
UPPER SEAT POST
BALL DETENT PIN
LOCATING HOLES
(TILLER BOOT SHADOWED FOR CLARITY)
Figure 8b. Reposition Tiller Adjustment
Figure 8a. Adjusting the Tiller Angle
TILLER ADJUSTMENT
LEVER
RELEASE BUTTON
TILLER BOOT
PULL OUT TO
REPOSITION
1. Turn the tiller adjustment lever counterclockwise
until it is loose. If the tiller adjustment lever comes
in contact with the tiller basket, pull it outward,
turn it clockwise, and release it. Continue to loosen
until the tiller is able to move. See figures 8A and
8B.
2. Move the tiller to a comfortable position.
3. Turn the tiller adjustment lever clockwise until it
is tight. If the tiller adjustment lever comes in con-
tact with the tiller basket, pull it outward, turn it
counterclockwise, and release it. Continue to turn
the lever until it is tight. The tiller may be lowered
to the center of the floorboard and locked in place
for storage. See IX. Disassembly and Assembly.
SEAT HEIGHT ADJUSTMENT
The seat can be repositioned to one of three different
heights. See figure 9.
1. Remove the seat from your Boxster. See IX. Dis-
assembly and Assembly.
2. Use the attached ring to pull and remove the ball
detent pin from the lower seat post.
3. Raise or lower the upper seat post to the desired
seat height.
4. While holding the upper seat post at that height,
match up the holes in the upper seat post and the
lower seat post.
5. Fully insert the ball detent pin.
6. Replace the seat.
LEVER (TILLER BOOT REMOVED FOR
CLARITY)
V I I I . COMFORT ADJUSTMENTS
Figure 9. Seat Height Adjustment