Filter
Top Products
14
Boxter
Your Boxster is a motorized electric PMV designed to enhance your personal mobility. Your Boxster is an
indoor/outdoor PMV designed to travel primarily on smooth surfaces such as sidewalks, roads, parking
lots, floors, and driveways. For easy transportation or storage, you can disassemble your Boxster into seven
components. See figure 5.
CONTROL CONSOLE ASSEMBLY
The control console assembly houses all the controls you need to drive your Boxster including the key
switch, the speed adjustment dial, the throttle control lever, the battery condition meter, the horn button,
turn signal buttons, the 4 to 8 switch, and the light switch. See figure 6.
Do not expose the control console assembly to moisture. In the event that the console does become exposed
to moisture, do not attempt to operate your Boxster until the control console assembly has thoroughly
dried.
KEY SWITCH
n Insert the key into the key switch and turn it clockwise to power up (turn on) your Boxter.
n Turn the key counterclockwise to power down (turn off) your Boxster.
WARNING! If the key is removed from the key switch while your Boxster is in motion, the
electronic brakes will engage and your Boxster will come to an abrupt stop!
Figure 5. Seven Boxster Components
FRONT SECTION
REAR SECTION
SEAT
BASKET
BATTERIES
REAR SHROUD
V. DESCRIPTION