Filter
Top Products
22
www.pridemobility.com Mini Crosser
V. BATTERIES AND CHARGING
! Limit your baggage weight to essential items.
! Try to maintain an even speed while your PMV is
in motion.
! Avoid stop-and-go driving.
What type and size of battery should I use?
We recommend deep-cycle batteries that are sealed
and maintenance free. Both AGM and Gel-Cell are
deep-cycle batteries that are similar in performance.
Do not use wet-cell batteries, which have removable
caps.
Refer to the specifications table for information.
NOTE: Sealed batteries are not serviceable. Do
not remove the caps.
To change a battery in your PMV:
WARNING! Corrosive chemicals are
contained in batteries. Use only
AGM or Gel-Cell batteries to reduce
the risk of leakage or explosive
conditions.
WARNING! Battery posts, terminals,
and related accessories contain
lead and lead compounds. Wash
hands after handling.
1. Remove the key from the key switch.
2. Remove the seat and rear shroud. See VII. “Com-
fort Adjustments.”
3. Disconnect the battery tie-down strap. See figure 12.
4. Pull back the terminal boot and disconnect the
battery cables from the battery terminals. See fig-
ure 13.
5. Remove the old battery.
6. Place a new battery in the battery well.
7. Reconnect the red positive (+) battery cable to
the positive (+) battery terminal. See figure 14.
8. Reconnect the black or blue negative (-) battery
cable to the negative (-) battery terminal.
NOTE: Ensure both battery terminals are cov-
ered with the terminal boots. See figure 12.
10. Reconnect the battery tie-down strap.
11. Reinstall the rear shroud and seat.
TERMINAL BOOTS
BATTERY STRAPS
Figure 13. Battery Cable Removal From The Terminal
BATTERY TERMINAL
BATTERY CABLE
Figure 12. Battery Straps
Figure 14. Battery Cable Orientation