Pride Mobility Maxima Mobility Aid User Manual


 
20
www.pridemobility.com Maxima
Manual Freewheel Lever
Whenever you need or want to push your scooter for short distances, you can put it in freewheel mode.
! Pull up firmly on the manual freewheel lever to disable the drive system and the brake system.
! You may push your scooter.
! Push down firmly on the manual freewheel lever to reengage the drive system and the brake system and take
your scooter out of freewheel mode.
WARNING! When your scooter is in freewheel mode, the braking system is disengaged.
! Disengage the drive motors only on a level surface.
! Ensure the key is removed from the key switch.
! Stand to the side of the scooter to engage or disengage freewheel mode. Never sit on
a scooter to do this.
! After you have finished pushing your scooter, always return it to the drive mode to lock
the brakes.
Failure to heed the above could result in personal injury and/or damage to your scooter.
Anti-Tip Wheels
The anti-tip wheels are an integral and important safety feature of your scooter. Do not, under any circumstances,
remove the anti-tip wheels from your scooter.
PROHIBITED! Do not remove the anti-tip wheels or modify your scooter in any way that is
not authorized by Pride.
The front (not shown) and rear anti-tip wheels are an integral and important safety feature of your scooter.
Do not, under any circumstances, remove the anti-tip wheels from your scooter.
Motor/Transaxle Assembly (Not Shown)
The motor/transaxle assembly is the electromechanical unit that converts the electrical energy of your
scooter’s batteries into the controlled mechanical energy that drives the scooter’s wheels.
Electronics Module
The electronics module houses all of the scooter’s harness mating plugs and electronic components for
charging the batteries.
Batteries (Not Shown)
The batteries store the electrical energy that powers your scooter. See VI. “Batteries and Charging.”
Fuses
The fuses help protect your scooter’s lighting and control console assembly systems from receiving an overload of electrical
current. The fuses used in the scooter are the same type automobiles use.
If a fuse must be replaced, use only the specified amp fuse. See XI. “Care and Maintenance.”
V. YOUR SCOOTER