Pride Mobility Jazzy 1105 Mobility Aid User Manual


 
Jazzy 1105/RevH/Feb03 www.pridemobility.com 23
FOOT PLATFORM ANGLE
You can adjust the angle of the foot platform with a 3/16-in. hex
wrench. See figure 12.
To adjust the foot platform angle:
1. Turn the set screw clockwise to raise the front of the footrest.
2. Turn the set screw counterclockwise to lower the front of the
footrest.
SWING-AWAY FOOTREST OPTION
Swing-away footrests are an option. They enable you to move the
leg rest to the side before getting off or on the Jazzy.
To move the swing-away footrests:
1. Push in the release lever.
2. Move the swing-away footrests.
ELEVATING LEG REST OPTION
Elevating Leg Rests (ELRs) offer a wide range of adjustments for
leg comfort.
To adjust the ELR angle:
1. Press the release lever.
2. Move the leg rest to the desired angle.
To adjust the ELR footrest height:
1. Loosen the 13-mm bolt on the bottom of the foot plate.
2. Slide the footrest in or out to the desired length.
3. Tighten the 13-mm bolt.
HIGH BACK WITH HEADREST
If your Jazzy is equipped with the deluxe high back seat, you can
adjust the headrest height.
To adjust the headrest height:
1. Push in the headrest release button.
2. Move the headrest up or down to the desired position.
VI. COMFORT ADJUSTMENTS
Figure 12. Foot Platform
Angle and Height
LOOSEN THIS
SETSCREW TO
ADJUST FOOT
PLATE ANGLE
REMOVE THESE
SCREWS TO
ADJUST FOOT
PLATE HEIGHT