Filter
Top Products
Installation and Care Instructions 7
www.quantumrehab.com Synergy Solution 1
CLEANING
The Synergy Solution 1 is designed for easy cleaning and maintenance.
To clean the Synergy Solution 1:
1. Locate the zipper on the rear of the cover. See figure 2.
2. Unzip the cover and pull out the cushion.
3. Wash the cover in a washing machine on the COLD setting.
WARNING! Do not use bleach when washing the cover. Doing
so may cause damage to the cover.
4. Spray the cushion with a disinfectant, then wipe it clean.
WARNING! Never submerge the cushion of your Synergy
Solution 1 in water. Doing so may cause damage to the
cushion.
5. Allow the cover to air dry.
WARNING! Do not attempt to put the cover in a dryer. This
may cause shrinking.
6. Once dry, put the cushion back inside the cover. Zip the cover closed, and
place the Synergy Solution 1 back onto the seat of your chair.
Figure 2. Cover Removal
COVER
CUSHION
ZIPPER ON
REAR SIDE