Filter
Top Products
6 Installation and Care Instructions
Synergy Solution 1 www.quantumrehab.com
THE SYNERGY SOLUTION 1
The Synergy Solution 1 is labeled to ensure proper placement on the chair.
To place the Synergy Solution 1 on the chair:
1. Locate the “Back Bottom” label on the underside of the cushion.
2. Place the cushion on the seat so that the “Back Bottom” label is located at the
back of the seat, label side facing down. The zipper on the cushion will face
the rear of the seat. See figure 1.
WARNING! Extreme temperatures can affect the temperature
of your cushion components and may cause skin irritation.
Use caution when your power chair has been used or stored
in an extremely hot or cold environment.
Figure 1. Cushion Placement
ZIPPER FACING REAR
OF SEAT