Filter
Top Products
Basic Operation Instructions 15
www.pridemobility.com Microdrive Controller
ACTUATOR ADJUSTMENT
The Microdrive controller can control five power accessory actuators using the
mode switch and the joystick.
To select and adjust an actuator:
1. Use the on/off switch to power on the chair and the controller.
2. To activate the actuator adjustment mode, press the mode switch down twice.
3. Push the joystick to the right to cycle through the available actuators. The
actuator indicator will display which actuator is activated. See figure 5.
4. When the desired actuator is selected, give a forward command to the joystick
to adjust position in one direction or give a reverse command to the joystick
to adjust position in the opposite direction.
5. Press the mode switch down again to return to the drive mode.
Figure 5. Actuator Indicators