Filter
Top Products
BASIC T ROUBLESHOOTING INSTRUCTIONS: JAZZY SELECT 14
What if the speed indicator LEDs on the VR2 begin to flash?
! Determine if the battery charger is connected to the power base. When the battery charger is connected to
the power base, an internal charger inhibit feature keeps the power chair from driving.
! Determine if the charger harness fuse has blown. A blown charger fuse can cause the charger inhibit to
activate.
What if all of the battery condition meter LEDs on the VR2 blink once every 2.5 seconds?
! This indicates that the VR2 is in sleep mode. Turn the controller off, then back on to resume normal operation.
INFINFB2048/Rev A/11-29-06 www.pridemobility.com 4