Pride Mobility 614 3S Wheelchair User Manual


 
22 www.pridemobility.com Quantum 614 Series
CONTROLLER POSITION
FOOT PLATFORM
ANGLE ADJUSTMENT
FOOT PLATFORM
HEIGHT/DEPTH
ADJUSTMENT
INITIAL ASSEMBLY
Your power chair may require some assembly either before initial use or after transportation. It may also require
disassembly to make some comfort adjustments. Figure 10 details those parts of the power chair that are designed
to be disassembled and assembled by an end user or by a qualified caregiver before using the product or making
comfort adjustments.
NOTE: Any nylon insert lock nut removed during the disassembly or adjustment of the power chair must be
replaced with a new nut. Nylon insert lock nuts should not be reused as it may cause damage to the nylon insert,
resulting in a less secure fit. Replacement nylon insert lock nuts are available at local hardware stores or
through your Quantum Rehab Provider.
IV. ASSEMBLY
ARMREST WIDTH ADJUSTMENT
Figure 10. Quantum 614 Series Assembly View (Standard Seating System Shown)
ARMREST ANGLE
ADJUSTMENT
SEAT INSTALLATION
SEAT HEIGHT/ANGLE ADJUSTMENT