Filter
Top Products
20 www.pridemobility.com Jazzy 610 Series
Manual Freewheel Levers
The Jazzy 610 has a manual freewheel lever on each motor. Manual freewheel levers enable you to disengage the drive
motors from the gearboxes and manoeuvre the chair manually.
WARNING! Do not use the power chair while the drive motors are disengaged! Do
not disengage the drive motors when the power chair is on an incline or decline, as
the unit could roll on its own! Only engage the freewheel mode when on a level
surface.
WARNING! It is important to remember that when your power chair is in freewheel
mode, the braking system is disengaged.
To engage or disengage the drive motors:
1. Locate the lever on top of each motor.
2. Push the two levers inward to engage the drive motors (drive mode). See figure 8.
3. Pull the two levers outward to disengage the drive motors (freewheel mode). See figure 9.
If a lever is difficult to move in either direction, slightly rock the power chair back and forth. The lever should then move to
the desired position.
WARNING! Do not use the freewheel lever handles as tie-down points to secure this product.
III. YOUR POWER CHAIR
Figure 9. Freewheel Mode (Drive Disengaged)
Figure 8. Drive Mode (Drive Engaged)