Pride Mobility 14 Mobility Aid User Manual


 
26 www.pridemobility.com Jazzy Elite Series
Follow these easy steps for a quick and safe replace-
ment of solid tires:
1. Turn off the power to the controller.
2. Make sure that the power chair is in drive mode. See
figure 4.
3. Raise and support the power base so that the wheel is
at least 1 in. (2.54 cm) off of the ground.
4. Remove the drive wheel nut and washer from the axle.
See figure 17.
5. Remove the drive wheel from the axle. Make sure that
you keep the axle key.
6. Replace the entire assembly.
7. Slide the wheel back onto the axle. Make sure that the
axle key is in the axle slot.
WARNING! Ensure that the axle key is
properly installed into the axle slot when
mounting the wheel. If not installed
securely, the braking system is
disengaged which may cause personal
injury and/or product damage may result.
8. Reinstall the drive wheel nut and washer onto the axle and tighten. See figure 17.
WARNING! Make sure both the nut and the washer are reinstalled and tightened properly.
9. Remove the power chair from the base support.
NOTE: Any nylon insert lock nut removed during the disassembly or adjustment of the power chair must be
replaced with a new nylon insert lock nut. Nylon insert lock nuts should not be reused as it may cause damage
to the nylon insert, resulting in a less secure fit. Replacement nylon insert lock nuts are available at local
hardware stores or by contacting your authorized Pride Provider.
Battery Replacement
A battery wiring diagram is printed on a decal located on the power base. See VI. “Batteries and Charging” for
correct battery specifications.
MANDATORY! Battery posts, terminals, and related accessories contain lead and
lead compounds. Wear goggles and gloves when handling batteries and wash hands
after handling.
WARNING! The batteries in your power chair should only be serviced or replaced by
an authorized Pride Provider or a qualified technician.
WARNING! Do not replace batteries when seat is occupied.
WARNING! Power chair batteries are heavy. Refer to the product specifications. If
you are unable to lift that much weight, be sure to get help. Use proper lifting
techniques and avoid lifting beyond your capacity.
WARNING! Do not mix old and new batteries. Always replace both batteries at the
same time.
PROHIBITED! Keep tools and other metal objects away from the battery terminals.
Contact with tools can cause electrical shock.
VII. CARE AND MAINTENANCE
Figure 17. Jazzy Elite Series Drive Wheel Removal
MOTOR
AXLE
SLOT
DRIVE
WHEEL
DRIVE WHEEL NUT
DRIVE WHEEL WASHER
AXLE KEY