Filter
Top Products
28 www.pridemobility.com Jazzy 1103 Ultra
V. COMFORT ADJUSTMENTS
To adjust the ELR angle:
1. Push down release lever B. See figure 22.
2. Move the leg rest to the desired angle.
To adjust the ELR length:
1. Remove the two adjustment screws from the side of
each leg rest extension. See figure 22.
2. Slide the leg rest up or down to the desired length.
3. Reinstall the two adjustment screws.
Heavy Duty Drop-in Leg Rests
You can adjust the forward/back position, as well as the
length of the heavy duty drop-in leg rests.
To adjust the forward/back position:
1. Remove the adjustment bolt from each side rail. See
figure 23.
2. Move the leg rest hanger in or out to the desired position.
3. Align the adjustment holes in the leg rest hanger with
those in the side rail.
4. Reinstall the adjustment bolts to secure the leg rest hangers.
To adjust the leg rest length:
1. Remove the adjustment screws from the leg rest
extension.
2. Slide the leg rest up or down to the desired length.
3. Align the adjustment holes in the leg rest extension and
reinstall the adjustment screws.
Anti-Tip Wheels
The anti-tip wheels are designed to give your power chair
Figure 24. Anti-Tip Wheel Assembly
ANTI-TIP WHEEL
A
B
Figure 23. Heavy Duty Drop-In Leg Rests
LEGREST
ADJUSTMENT SCREWS
ADJUSTMENT BOLT
increased stability on rough surfaces. The anti-tip wheels are preset at the factory for smooth surfaces or indoor use only.
If you plan on using your power chair on rough surfaces, it may be necessary to adjust the anti-tip wheels to better suit your
needs. The anti-tip wheels may need adjustment if the following occurs:
! When coming to a stop, your power chair tips forward excessively.
! The anti-tip wheels constantly rub the ground.
WARNING! Consult your authorized Pride Provider before attempting to change the anti-tip wheel
height! Changing the anti-tip wheel height affects handling under acceleration!
WARNING! The higher you raise the anti-tip wheels, the more you increase your power chair’s
tendency to tilt forward while decelerating. You can compensate for this by having your authorized
Pride Provider make a small adjustment to the pre-programmed deceleration setting in the controller
or by moving the seat assembly farther to the back of your power chair.
PROHIBITED! Do not remove the anti-tip wheels.
LEG REST HANGER