Filter
Top Products
Page 3
Installation Instructions
N421
install
5. Locate the plug ports
Locate the plug ports under the front
of the scale and plug in the small end
of the power cable.
6. Connect the
postage meter cable
If using a Postage Meter, plug the
small end of the meter cable into the
scale.
4. Install the Rate PROM
If you have been supplied with a
PROM, slide it into its slot ensuring the
opening in the PROM handle is in the
top right corner. Press it firmly until it
snaps into place. Refit platform.
If a rate PROM has not been supplied,
you can omit this stage.
7. Tuck the cable(s) into
the cable guides
Tuck the cable(s) under the guides on
the bottom of the scale.
Turn the scale back onto its feet.