8.
ENGLISH
9.
ENGLISH
C
4 If a lot of hair has accumulated in the
Guide Comb,remove the Comb
Attachment and blow and/or shake the
hair out of the comb. The selected
trimming length setting will not change
when you do this.
Trimming Length Settings Table
Trimming For “Stubble” Look
C
◗ Be certain Guide Comb is on Trimmer and
use setting #1 to result in a “stubble” look.
Trimming with ACU•CONTROL
Guide Comb Attachment
◗ Guide Comb Attachment must be on Trimmer
in order to use Zoom Ring.
C
1 Turn the Zoom Ring to the desired
trimming length setting (see table). The
setting will appear in the window below
the Zoom Ring.
◗ If you are trimming for the first time,start by
using the maximum trimming length setting #9
to prevent accidentally trimming hairs too short.
As you become familiar with the settings,adjust
Zoom Ring to desired trimming length. Zoom
Ring will “click” into position at each setting.
2 Switch the Trimmer ON.
C
3 To trim in the most effective way,move
the Trimmer against the direction of hair
growth. Make sure the surface of the
Guide Comb always stays in contact with
the skin.
NOTE: Since all hairs do not grow in the same
direction, you may want to try different trimming
positions (i.e., upwards, downwards, or across).
Practice is best for optimum results.
9
9
#1 “Stubble” Length or Closely Cropped .06 in./1.5 mm
#2 Short .1 in./2.5 mm
#3 .16 in./4 mm
#4 .22 in./5.5 mm
#5 Medium .3 in./7.5 mm
#6 .38 in./9.5 mm
#7 .48 in./12 mm
#8 .6 in./15 mm
#9 Long .72 in./18 mm
1