Filter
Top Products
◗ Check if the voltage indicated on the powerplug corresponds to
the local mains voltage before you connect the appliance.
◗ Only use the powerplug supplied.
◗ Keep the appliance out of the reach of children.
◗ Charge, use and store the appliance at a temperature between
15cC and 35cC.
◗ This appliance is only designed for trimming the human beard.
Do not use the appliance for any other purpose.
◗ Do not use the appliance if the cutting unit is damaged or
broken, as this may cause injury.
◗ If the powerplug is damaged, always have it replaced by one of the
original type in order to avoid a hazard.
◗ If the appliance is subjected to a major change in temperature,
pressure or humidity, let the appliance acclimatise for 30 minutes
before you use it.
Charging
Charge the appliance fully before using it for the first time or after a
long period of disuse.
Make sure the appliance is switched off before you start charging it.
Charging takes about 70 minutes if the appliance is completely empty.
1 Insert the appliance plug into the appliance and put the
powerplug in the wall socket.
Battery indications
◗ The green light burns continuously during fast charging (fig. 2).
◗ The green light starts blinking when the battery is full (fig. 3).
◗ If the red light blinks when you switch the appliance off after
cordless use, the battery is low and needs to be charged (fig. 4).
◗ If the red light blinks but the motor does not start running when
you press the on/off button, the battery is empty and needs to be
charged.
ENGLISH 7