Filter
Top Products
5 Read the temperature on the display, then press the
button lightly to turn the thermometer off.
The thermometer will automatically turn off after
30 seconds if you forget to do so.
To take another temperature at any time, simply press
the button and repeat the process.
6 The thermometer does not require cleaning after every
reading, but like a camera lens, it should always be kept
clean.To clean, point the sensor downwards, and gently
wipe with a cotton swab or soft cloth moistened with
rubbing alcohol or water.
Do not use a paper towel or abrasive cleaners.
7 Place the protective cap on thermometer to protect
the sensor when not in use.
11.10.
HOW TO TAKE A TEMPERATURE
To ensure that you take an accurate temperature,
please follow the instructions below.
1 Remove protective cap before use. Place the thermo-
meter in your hand as shown with your thumb on the
Soft Touch button.
Do not press the button yet.
2 Gently position the sensor flush on center of the
forehead, midway between eyebrow and hairline.
Press and release the ON/OFF button.
Wait until the sensor is flush against the forehead
before pressing the button, if not, the thermometer will
beep and display “—”.
3
Slowly slide the thermometer across the forehead,
keeping the sensor flat and in contact with the skin until
you have reached the area at the top of the ear.
You will hear beeping and the LEDs will blink to indicate
a measurement is taking place.
Be careful not to keep the sensor on one spot for too
long, the thermometer will indicate that the measure-
ment has been completed before you have reached the
temporal artery.
4 After the long beep when the red LED remains on, the
measurement is complete and the thermometer may be
removed from the head.